CNC Violin Block 7mm - Walnut
Code: WAB-VB7Product detailed description
Violin block – This special block consisted of one larger and one smaller sheave positioned one above the other. The violin block was initially used where a double block was needed for tightening sheets or heavily loaded tackles – for example, for hoisting individual sections of masts and large yards, or for tightening top stays. Over time, in the 19th century, these blocks were replaced by standard double blocks.
Instructions on how to select the correct blocks
Instructions on how to use the blocks
Table of block size and corresponding rope diameter
| Height of blocks |
Diameter of rope |
Diameter of Amati ropes |
| 2,0 | 0,16 | 0,1 |
| 2,50 | 0,2 | 0,1 |
| 3,00 | 0,24 | 0,25 |
| 2,50 | 0,28 | 0,25 |
| 4,00 | 0,32 | 0,25 or 0,0,5 |
| 4,50 | 0,36 | 0,5 |
| 5,00 | 0,4 | 0,5 |
| 6,00 | 0,48 | 0,5 |
| 7,00 | 0,56 | 0,5 or 0,75 |
| 8,00 | 0,64 | 0,75 |
| 9,00 | 0,72 | 1 |
| 10 | 0,8 | |
Additional parameters
| Category: | Special blocks |
|---|---|
| EAN: | 8594193991341 |