Zeven Provincien - set of blocks for running rigging for sail installation
Code: SET-KS005-03Product detailed description
Set Contains a total of 144 wooden walnut blocks for handling sails, it is necessary to have purchased a set of blocks for running rigging SET-KS005-02. Their exact list can be found in the table below, which also corresponds to the markings of the blocks in the plans you will receive with the set.
This set of blocks is based on the plans by Otte Blom, who has been studying this ship for a long time. You can visit his site HERE. The rigging plans can be found in Chapter 80.
Additional parameters
| Category: | Zeven Provinciën 1:72 |
|---|---|
| 1: | C-WaB-SB1/3 CNC single block 1/3mm - Walnut-old type (40x) |
| 2: | C-WaB-SB1/4 CNC single block 1/4mm - Walnut-old type (4x) |
| 3: | C-WaB-SB1/4,5 CNC single block 1/4,5mm - Walnut-old type (56x) |
| 4: | C-WaB-SB1/5 CNC single block 1/5mm - Walnut-old type (10x) |
| 5: | TR Rope threader (2x) |
| 6: | C-WaB-SB1/3,5 CNC single block 1/3,5mm - Walnut-old type (8x) |
| 7: | C-WaB-SB1/9 CNC single block 1/9mm - Walnut-old type (8x) |
| 8: | C-WaB-SB1/10 CNC single block 1/10mm - Walnut-old type (2x) |
| 9: | WaB-SB1/2,5 CNC single block 1/2,5mm - Walnut (34x) |